Difference between revisions of "FoxFury Nomad Tripod Lights"
From MEFD
(Add manual) |
|||
| Line 9: | Line 9: | ||
* Power on and test all three brightness levels. | * Power on and test all three brightness levels. | ||
* Inspect and attach diffuser. | * Inspect and attach diffuser. | ||
* Charge if | * Charge if the base light is not green. | ||
When powered on the indicator lights at the base of the tube tell you the battery status. | When powered on the indicator lights at the base of the tube tell you the battery status. | ||
Latest revision as of 22:11, 29 May 2022
These portable scene lights are carried on most of the apparatus. We frequently use them on MVAs, medical calls and fires.
Maintenance and Inspection
- Setup the light (see video: https://www.youtube.com/watch?v=Wde1JteBUzg).
- Extend the telescoping section through its full range (8 ft).
- Inspect for damage, wear and tear.
- Clean as needed.
- Power on and test all three brightness levels.
- Inspect and attach diffuser.
- Charge if the base light is not green.
When powered on the indicator lights at the base of the tube tell you the battery status.
- Green: battery is charged.
- Orange: partially charged.
- Red: Nearly depleted.
Charging
Plug the labeled charger into the port at the bottom edge of the light. The led indicator at the base of the light will flash green as it charges. When the charge is complete it will glow steady green.
Note: These lights can be run while they are plugged in if needed.
Specs
- High power: 4000 lumens, 3 hour runtime
- Medium power: 1300 lumens, 9 hour runtime
- Low power: 500 lumens, 24 hour runtime
- Recharges in 5 hours
- Waterproof
